Basic Operation; Preparing The Appliance; Processing Ingredients With Tools; Using Instantaneous Switching - Bosch 6 Series Instructions For Use Manual

Basic operation

7 Basic operation
Basic operation
7.1 Preparing the appliance
Press the release button and raise
1.
the swivel arm until it engages.
→ Fig.
6
Place the bowl in the main unit.
2.
→ Fig.
7
Use the recesses on the main unit.
Turn the bowl anticlockwise until it
3.
engages.
→ Fig.
8
Fit the lid onto the main drive until
4.
it engages.
→ Fig.
9
The filling shaft must face towards
the front.
Press the tool into the main drive
5.
until it engages.
→ Fig.
10
The protective cap
the main drive completely.
Add the ingredients to the bowl.
6.
→ Fig.
11
Press the release button and push
7.
the swivel arm down until it en-
gages.
→ Fig.
12
7.2 Processing ingredients
with tools
Insert mains plug.
1.
Set the rotary switch to the re-
2.
quired speed.
→ Fig.
13
must cover
If wished, further ingredients can
3.
be added during processing using
the filling shaft.
→ Fig.
14
To add greater quantities, switch
off the appliance, open the swivel
arm and transfer the ingredients to
the bowl.
Process the ingredients until you
4.
achieve the required result.
Set the rotary switch to
5.
→ Fig.
15
Wait until the appliance stops.
7.3 Using instantaneous
switching
Set the rotary switch to
1.
hold.
→ Fig.
16
a The ingredients are processed at
maximum speed.
Release the rotary switch.
2.
→ Fig.
17
a The rotary switch springs to
a Processing stops.
Tip: Instantaneous switching is espe-
cially suitable when using the glass
blender attachment.
7.4 Finishing processing
Unplug the mains plug.
1.
→ Fig.
18
Press the release button and raise
2.
the swivel arm until it engages.
→ Fig.
19
If the swivel arm does not open
3.
easily or there is a lot of dough on
the tool, proceed as follows:
Open up the swivel arm a bit
‒
and use a spatula or wooden
spoon to push the dough off the
tool.
Basic operation en
⁠ .
and
⁠ .
33