Care And Daily Cleaning - Bosch MUC24 Series Instruction Manual

en Care and daily cleaning
recipe 1 / recipe 2 –
saving personal preparation
programmes
Depending on the model X "Model
overview and technical data" see page 22
Personal preparation programmes with
customised time and temperature can
be saved under the memory locations
[recipe 1] and [recipe 2 ].
1. In function selection mode, press button
D once.
The LED [recipe 1] lights up. The pre-
confi gured preparation time is shown in the
display.
Note: if you have not previously saved any
personal preparation programmes, "00:00"
is shown in the display.
2. Press button F once.
The display fl ashes. LED 1 (preparation
step 1) lights up in the control panel.
3. Keep pressing button F until the desired
preparation time is displayed.
When button F is briefl y pressed, the prepa-
ration time is increased by 1 minute. When
button F is pressed for a longer period, the
preparation time is increased by 10 minutes.
The time increases up to the pre-confi gured
maximum value and then returns to the
pre-confi gured minimum value.
4. Press button C once.
The pre-confi gured preparation temperature
is shown in the display.
Note: if you have not previously saved any
personal preparation programmes, "0000" is
shown in the display.
5. Keep pressing button C until the desired
preparation temperature is displayed.
6. Press and hold button G (>2 seconds)
to save the set values.
In order to programme other preparation
steps, repeat points 2 to 6. Up to 3
preparation steps can be programmed.
The saved preparation programme [recipe 1]
can be selected as usual via function
selection mode X "Selecting and starting a
preparation programme" see page 9
16
MUC2_MUC4_EU2.indb 16
Note: To save a second personal preparation
programme under [recipe 2], use the same
process as described above for [recipe 1].
To delete a personal preparation
programme, perform the following steps:
1. In function selection mode, press
button D once.
The LED [recipe 1] lights up. The saved
preparation time is shown in the display.
2. Press button F once.
The display fl ashes. LED 1 (preparation
step 1) lights up in the control panel.
3. Press and hold button H (>2 seconds).
The settings for [recipe 1] are deleted.
Note: To delete the second personal
preparation programme [recipe 2], use
the same process as described above for
[recipe 1].

Care and daily cleaning

W Risk of electric shock
■ Never immerse the appliance in water.
■ Do not steam-clean the appliance.
■ Unplug the appliance before cleaning it.
Caution!
■ Do not use any cleaning agents
containing alcohol or spirits.
■ Do not use any sharp, pointed or metal
objects.
■ Do not use abrasive cloths or cleaning
agents.
The appliance must be thoroughly cleaned
after each use.
1. Let the appliance cool down completely.
2. Open the lid.
3. Remove the pan, lid insert, steam outlet
and accessories. X "Before using for
the fi rst time" see page 7
15.03.2016 12:58:57