Bosch MUC24 Series Instruction Manual page 9

In function selection mode, button B and
the indicator [my mode] are permanently lit.
Button G flashes. "00:00" is shown in the
display.
Note: If no input is made on the control
panel within 5 minutes, the appliance
automatically switches to standby mode.
Selecting and starting a
preparation programme
There are 16 pre-configured preparation
programmes available to choose from.
X "List of preparation programmes" see
page 18
1. Fill the appliance with the desired
ingredients. To do this, open the lid and
pour the ingredients into the pan. The
measuring scale on the inside of the pan
can also be used to read the quantity.
Caution!
■ Do not fill the pan beyond the marking
[4.0 litres]!
■ Use only the spatula provided for stirring
(do not use metal cutlery).
2. Close the lid and press button B to
access function selection mode.
Note: Certain preparation programmes
or steps are carried out with the lid open.
X See recipe book provided
MUC2_MUC4_EU2.indb 9
3. Keep pressing button D until the
desired preparation programme is
selected.
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for the selected
preparation programme flashes.
4. Press button G to start the preparation
programme.
The appliance heats up the pan until the
target temperature is reached. During
the heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature is reached,
the lines go out and the preparation time is
shown in the display.
The preparation process starts
automatically.
Note: When the programme [pasta] or
[deep fry] is selected, a repeating audible
signal is emitted and the display and button
G flash until the food has been added and
button G has been pressed.
Operation en
9
15.03.2016 12:58:48