Table of Contents
Advertisement
Execution timing
■Specified Time (Hour, Minute, Day of Week)
Set an execution time within the following range in "Clock Time (Hour, Minute)".
Unit
Hour
Minute
To specify the day of the week to perform the time setting, select "Not Set" for the day on which time setting is not performed
under "Day of Week". Make sure that at least one day of the week is set to "Set". An error occurs if "Not Set" is selected for all
the days.
Security
Set the security settings.
[Module Parameter] [Application Settings] [Security]
Window
Displayed items
Item
IP Filter Settings
IP Filter
IP Filter Settings
Disable Direct Connection with MELSOFT
Do Not Respond to CPU Module Search
IP filter settings
Up to 32 IP addresses can be set to allowed/denied using the IP filter function.
The range of IP address and IP addresses to be excluded from the specified range can be set at one setting.
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
Setting range
0 to 23
0 to 59
Description
Set whether to use the IP filter function.
Set the IP addresses to be allowed/denied.
Enables/disables the direct connection with CW Configurator.
Set whether to respond to the CPU module search on the network.
Description
Set whether to allow/deny the access from the specified IP addresses.
Select this when specifying IP address range.
Set the IP addresses to be allowed/denied.
When a checkbox of "Range Setting" is selected, set both start IP address
and end IP address within the range.
When a checkbox of "Range Setting" is selected, set the IP address to be
excluded from the range in "IP Address". Up to 32 IP addresses can be set
within the specified range.
Setting range
• Not Use
• Use
• Disable
• Enable
• Do Not
Respond
• Respond
Setting range
• Allow
• Deny
0.0.0.1 to
223.255.255.254
0.0.0.1 to
223.255.255.254
6 Ethernet COMMUNICATION FUNCTIONS
6.7 Parameter Settings
6
Default
Not Use
Enable
Respond
Default
Allow
Unselected
123
Advertisement
Table of Contents
