Appendix 14Added And Changed Functions - Mitsubishi Electric MELSEC iQ-R C R12CCPU-V User Manual

Controller module
Hide thumbs Also See for MELSEC iQ-R C R12CCPU-V:
Table of Contents

Advertisement

Appendix 14
The following table shows the functions added and changed for a C Controller module and CW Configurator, the applicable
firmware version for a C Controller module, and applicable software version for CW Configurator.
: Not related to the firmware version or software version
Added and changed function
USB devices are supported.
Multiple CPU system configuration with a programmable
controller CPU controlling a MELSECNET/H network module
is supported.
The following modules are supported:
• Process CPU
• Channel isolated analog-digital converter module
• Channel isolated digital-analog converter module
• Channel isolated RTD input module
• Channel isolated thermocouple input module
MELSEC iQ-R series modules which occupy two slots are
supported.
CC-Link IE Controller Network using RJ71EN71 is
supported.
The label communication function is supported.
The following units and modules are supported:
• Extended temperature range main base unit
• Extended temperature range extension base unit
• MES interface module
• High speed analog-digital converter module
• Temperature control module
• MELSECNET/H network module
The daylight saving time function is supported.
Label communication with R04ENCPU, R08ENCPU,
R16ENCPU, R32ENCPU, and R120ENCPU is supported.
Device access to R04ENCPU, R08ENCPU, R08SFCPU,
R16ENCPU, R16SFCPU, R32ENCPU, R32SFCPU,
R120ENCPU, and R120SFCPU is supported.
The data analysis function is supported.
The following modules are supported:
• DC high-speed input module (RX61C6HS)
• Transistor high-speed output module (RY41NT2H)
• Flexible high-speed I/O control module
Multiple CPU system using a safety CPU is supported.
The CC-Link IE Field Network Basic function is supported.
The firmware update function is supported.
The following modules are supported.
• Power supply modules (R62P and R64P)
• DC high-speed input modules (RX40PC6H and
RX40NC6H)
• High speed data logger module (RD81DL96)
• C intelligent function module (RD55UP06-V)
• CANopen module (RJ71CN91)
• Device net master/slave module (RJ71DN91)
• Simple motion modules (RD77GF4, RD77GF8,
RD77GF16, RD77GF32)
Added and Changed Functions
Firmware version
'03' or later
'03' or later
'04' or later
'06' or later
'07' or later
'07' or later
'08' or later
'09' or later
'10' or later
Software
Reference
version
Page 24 Memory Configuration
Page 27 Files
MELSEC iQ-R C Controller Module User's
Manual (Startup)
MELSEC iQ-R Module Configuration
'1.001B' or later
Manual
'1.002C' or later
MELSEC iQ-R Module Configuration
Manual
MELSEC iQ-R Ethernet/CC-Link IE User's
Manual (Startup)
MELSEC iQ-R CC-Link IE Controller
Network User's Manual (Application)
Page 57 Label Communication Function
'1.004E' or later
MELSEC iQ-R Module Configuration
Manual
Page 36 Daylight saving time function
Page 57 Label Communication Function
Page 45 Device Access Function
Page 59 Data Analysis Function
MELSEC iQ-R Module Configuration
'1.006G' or later
Manual
'1.004E' or later
MELSEC iQ-R Module Configuration
Manual
Page 125 CC-Link IE Field Network Basic
FUNCTION
MELSEC iQ-R Module Configuration
Manual
MELSEC iQ-R Module Configuration
'1.009K' or later
Manual
Appendix 14 Added and Changed Functions
A
APPX
253

Advertisement

Table of Contents
loading

Table of Contents