Table of Contents
Advertisement
When connecting directly with C Controller module, the setting above can also be performed by clicking the
[CPU Module Direct Coupled Setting] button in the "Specify Connection Destination" window.
3.
Set the protocol.
4.
Set the module to be connected to "PLC side I/F".
5.
Double-click the icon of the set module to display the
"PLC side I/F Detailed Setting" window.
6.
Select "Ethernet Port Direct Connection" for the
connection method.
7.
Click the [OK] button once the setting is completed.
6 Ethernet COMMUNICATION FUNCTIONS
6.1 Connection with MELSOFT product or GOT
6
107
Advertisement
Table of Contents
