Table of Contents
Advertisement
Network configuration settings
Set the network configuration settings.
Window
(1)
(2)
(1) List of stations
(2) Device map area
(3) Drag and drop
Displayed items
Item
[Detect Now] button
[Link Scan Setting] button
Connected Count
No.
Model Name
STA#
Station Type
RX/RY Setting
Points
Start
End
RWw/RWr Setting
Points
Start
End
Group No.
RSVD STA
Description
Connected devices are automatically detected.
(This function cannot be used for this product.)
Configure the link scan setting. (Page 141 Link scan setting)
The total number of connected slave stations is displayed.
The station number of the slave station is displayed.
Module model name is displayed.
When there is no module information, "Module With No Profile
Found" is displayed.
The start station number of the slave station is displayed.
The station type (master station/slave station) is displayed.
Set the assignment of the number of points for RX/RY in 64-point
units.
The start number of RX/RY is displayed.
The end number of RX/RY is displayed.
The number of points for the number of stations in 32-point units is
displayed.
The start number of the RWw/RWr is displayed.
The end number of RWw/RWr is displayed.
Set the group number of slave stations.
Set whether to set the slave station as a reserved station.
(3)
Setting range
64 (1 Occupied Station)
128 (2 Occupied Station)
192 (3 Occupied Station)
256 (4 Occupied Station)
*1
1 to 4
• No Setting
• Reserved Station
7 CC-Link IE Field Network Basic FUNCTION
7.3 Parameter Settings
7
Default
64 (1 Occupied
Station)
1
No Setting
139
Advertisement
Table of Contents
