Table of Contents
Advertisement
Item
IP Address
Subnet Mask
MAC Address
Comment
*1 Groups do not need to be numbered serially. For example, setting group No.2 only (number of groups: one) and setting group No.1 and
No.3 (number of groups: two) are both possible.
A C Controller module does not perform automatic detection of connected devices, reflection of the
communication setting of slave stations, and parameter processing of slave stations. Set the communication
setting such as an IP address and subnet musk, and slave station specific parameters on each slave station.
The slave devices on which parameters cannot be set cannot be used.
7 CC-Link IE Field Network Basic FUNCTION
140
7.3 Parameter Settings
Description
Specify the IP address of a slave station.
Specify the subnet mask of the slave station.
The MAC address of the slave station is displayed.
The information entered in "Comment 1" in the "Properties" window
displayed by right-clicking the module in the list of stations or device
map area is displayed.
Setting range
Default
0.0.0.1 to
• First to third octet:
223.255.255.254
first to third octet
of the IP address
of the master
station
• Fourth octet:
Automatically
numbered from
the number not in
use from 1 to 254
in ascending
order
0.0.0.1 to
Subnet mask of the
255.255.255.255
master station
32 characters
(Blank)
Advertisement
Table of Contents
