Table of Contents
Advertisement
Refresh setting
Set refresh parameters.
Window
Displayed items
Item
Link Side
CPU Side
Target
Device Name
Points
Start
End
7 CC-Link IE Field Network Basic FUNCTION
142
7.3 Parameter Settings
Description
The number of points for the link devices (RX/RY, RWr/RWw)
for the number of occupied stations and start/end device
number set in the network configuration settings are displayed.
The target for link refresh is displayed.
Set the device of the link refresh target.
The number of device points for the link refresh target is
displayed. (The same value as the number of points on the link
side is displayed.)
Set the start device number within the link refresh range.
The end device number within the link refresh range is
displayed.
Setting range
Default
Specify Device
(Blank)
M, B, D, W, ZR
(Blank)
Use the device range of
(Blank)
C Controller module.
(Page 209 Device
List)
Advertisement
Table of Contents
