Mitsubishi Electric MELSEC iQ-R C R12CCPU-V User Manual page 113

Command list
The available commands for C Controller modules are as follows.
Item
Type Operation
Device Read
Write
Read Random
Write Random
Read Block
Write Block
Extend Unit Read
Write
Remote Remote Run
Control
Remote Stop
Remote Pause
Remote Reset
Read Type Name
File Read Directory/
File
Search Directory/
File
New File
Delete File
Copy File
Change File State
Change File Date
Open File
Read File
Write File
Close File
Comman Subcommand Description
d
0401 001 Reads values from bit devices (consecutive device number) in 1-point units.
000 • Reads values from bit devices (consecutive device number) in 16-point units.
• Reads values from word devices (consecutive device number) in 1-word units.
003 Reads values from bit devices (consecutive device number) in 1-point units.
002 • Reads values from bit devices (consecutive device number) in 16-point units.
• Reads values from word devices (consecutive device number) in 1-word units.
1401 001 Writes values to bit devices (consecutive device number) in 1-point units.
000 • Writes values to bit devices (consecutive device number) in 16-point units.
• Writes values to word devices (consecutive device number) in 1-word units.
003 Writes values to bit devices (consecutive device number) in 1-point units.
002 • Writes values to bit devices (consecutive device number) in 16-point units.
• Writes values to word devices (consecutive device number) in 1-word units.
0403 000 Reads values from word devices in 1-word units or 2-word units by specifying device
number. Nonconsecutive device numbers can be specified.
002 Reads values from word devices in 1-word units or 2-word units by specifying device
number. Nonconsecutive device numbers can be specified.
1402 001 Writes values to bit devices in 1-point units by specifying device number.
Nonconsecutive device numbers can be specified.
000 • Writes values to bit devices in 16-point units by specifying device number.
• Writes values to word devices in 1-word units or 2-word units by specifying device
003 Writes values to bit devices in 1-point units by specifying device number.
Nonconsecutive device numbers can be specified.
002 • Writes values to bit devices in 16-point units by specifying device number.
• Writes values to word devices in 1-word units or 2-word units by specifying device
0406 000 Reads data by specifying multiple blocks as regarding one block as n-point of word
devices or bit devices (1-point is 16-bit). Nonconsecutive device numbers can be
002
specified.
1406 000 Writes data by specifying multiple blocks as regarding one block as n-point of word
devices or bit devices (1-point is 16-bit). Nonconsecutive device numbers can be
002
specified.
0601 0000 Reads data in the buffer memory of an intelligent function module.
1601 0000 Writes data in the buffer memory of an intelligent function module.
1001 0000 Performs remote RUN to the access target module.
1002 0000 Performs remote STOP to the access target module.
1003 0000 Performs remote PAUSE to the access target module.
1006 0000 Performs remote RESET to the access target module.
0101 0000 Reads model and model code of the access target module.
1810 0040 Reads information list of the file.
1811 0040 Reads fine number, file size, and existence of the specified file.
1820 0040 Reserves the storage area in the specified file.
1822 0040 Deletes files.
1824 0040 Copies the specified file.
1825 0040 Changes the file attribute.
1826 0040 Changes the file creation date.
1827 0040 Locks the file in order that the file content is not changed form other devices.
1828 0000 Reads the content of a file.
1829 0000 Writes content to a file.
182A 0000 Unlocks a file with open processing.
Nonconsecutive device numbers can be specified.
number. Nonconsecutive device numbers can be specified.
Nonconsecutive device numbers can be specified.
number. Nonconsecutive device numbers can be specified.
6 Ethernet COMMUNICATION FUNCTIONS
6.2 Communication with SLMP
6
111