Reset Device Page - Extron electronics DVS 605 Series User Manual

Reset Device Page

This page allows the user to reset the device. Click this button
page.
Figure 94.
There are three reset options available (see figure 94,
• Reset scaler settings to default (Retains IP)
• Reset scaler settings, and delete user files (Retains IP)
Reset scaler settings, delete user files, and reset IP settings
•
Depending on the selected reset option, different settings are cleared.
NOTE: A reset option must be selected in order to reset the device.
Reset scaler settings to default (Retains IP) — Resets the settings associated with
input settings, the output image, EDID, PIP, and audio. This includes presets and auto
memories, except Ethernet settings.
NOTE: Ethernet settings include the IP address, subnet mask, gateway IP address,
device name, DHCP setting, and port-mapping.
Reset scaler settings, and delete user files (Retains IP) — Resets all settings on the
device to factory defaults (deletes user files), except the Ethernet settings.
Reset scaler settings, delete user files, and reset IP settings — Resets all settings
on the device to factory defaults (deletes user files) including the Ethernet settings.
Ethernet settings default to DHCP set to Off, IP address = 192.168.254.254.
To reset the device:
1. Click the desired radio button of the three reset options (
2. Click Reset (
box opens.
3. In the dialog box, click Yes to continue
with the reset, or No to abort the reset.
NOTE: If the device is reset back to default settings, there will be no password. A new
password will need to be configured to secure the device (see
page 121).
1
Reset Device Page
). A confirmation dialog
2
2
):
1
).
1
Password Page
DVS 605 • Using the Default Web Pages
to open the
on
122