Communication Settings Page - Extron electronics IN1606 series User Manual

Communication Settings Page

The
Communication Settings
RS-232 and Ethernet connections. Click the
figure 81,
Figure 84.
RS-232 settings
1. From the
rate.
2. Click the
Ethernet settings
To configure the Ethernet settings for use with DHCP:
1. Select the
2.
Click the
To configure the Ethernet settings with a static IP address:
1. Ensure the
2. In the
3. In the
4. In the
5. In the
6. Click the
To reset to default settings:
To reset the device to default connection values, click the
To cancel changes:
At any time, click the
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
page contains options to adjust device settings for
on page 115) on the
4 Global Navigation Bar
Communication Settings Page
drop-down menu (see figure 84,
Baud Rate
button ( ).
Apply 7
check box (
Use DHCP 2
button ( ).
Apply 7
check box (
Use DHCP
field ( ), enter an IP address.
IP Address 3
field ( ), enter the subnet mask if required.
Subnet Mask 4
field (
Default Gateway 5
field ( ), enter a DNS server name if required.
6
DNS Sever
button ( ).
Apply 7
button (
Cancel
Communication Settings
to open the page.
), select the appropriate baud
1
).
) is not selected.
2
), enter the default gateway if required.
Reset to Default
) to keep the last saved settings.
9
icon (see
button ( ).
8
117