Overview; System Components And Unpacking - Lightspeed Redcat Access User Manual

SECTION 1:

OVERVIEW

SYSTEM COMPONENTS AND UNPACKING

The standard configuration of the Topcat system will contain:
®
Topcat Access
Flexmike
1 2
Volume Control
Microphone
Cradle Charger for
Flexmike
NOTE ON REGISTRATION: The Topcat and any wireless components (microphones, Activate
Station, Media Connector) are pre-registered (paired) together at the Lightspeed factory as
required for proper operation. If paired components are separated and swapped during the
installation process, they must be re-registered. If necessary, please refer to the registration
instructions at www.lightspeed-tek.com/accessregistration.
Lightspeed recommends that the microphone(s), Activate, Media Connector and/or the
accessory box be labeled with the room number of the Topcat that the components are
registered with for proper disbursement.
To assist in this process, Lightspeed has labeled each registered component with a system
number. If components become separated, simply match them up by this number for proper
operation. Additional system labels are attached to the Quick Start Guide should you add
components, or if one of your original components should need to be replaced.
6