Lightspeed Redcat Access User Manual page 18

SHAREMIKE: CHARGING
1. Make sure the charger is plugged
into a wall outlet. Connect one end
of the charging cable into the jack
labeled CHARGE on the bottom of the
Sharemike.
2. Plug the other end into the USB jack
on the back of the cradle charger.
3. If the Sharemike is registered as MIC 2,
the MIC 1 light on the microphone will
glow red to indicate charging.
NOTE: If Activate Station was purchased with
your system, please refer to page 24 for charging
instructions.
PLEASE NOTE: The Topcat Access and microphone(s) are registered, or paired, together
at the factory and all components should be kept together as a system. Moving them
from one system, or room, to another will result in the need to re-register.
18
4. Leave the Sharemike plugged in
overnight (8-10 hours) to obtain a full
charge. The light will turn green when
charging is complete.
5. If Sharemike is registered as MIC 1, low
battery and charging indicator will be
the MIC 2 light.
6. During charging the blue light will stay
on.