Private Conversations; End Of Day - Lightspeed Redcat Access User Manual

OPERATING THE FLEXMIKE
1. At start of day, remove the microphone from the charger
and put on.
•
•
•
•
•

2. Private conversations.

•
•

3. End of day.

•
•
•
•
•
REMEMBER: This equipment supplements the user's voice so they are able to speak in a
conversational tone. Having the volume set too high will result in feedback and listener
fatigue.
14
The microphone will default to the Mute position, the status
will turn to red.
Place the microphone around your neck.
Press the power/mute button, the light will turn blue,
indicating the microphone is active and ready to use.
Adjust volume with the UP/DOWN buttons if necessary.
If Flexmike needs to be powered down for some time, press
and hold the power button. To power Flexmike again, press
and hold the power button until the blue light begins to
blink.
Mute the Flexmike during private conversations by
momentarily pressing the power button. When muted, the
blue light turns red.
When conversation is over, momentarily press the power
button again to unmute the Flexmike.
Remove the Flexmike from around your neck.
Place the Flexmike into the cradle charger and ensure the it
is plugged in to an outlet.
The Flexmike will stay powered on during charging, but will
automatically be muted.
It is not necessary to turn off the Topcat at end of day, but
you may do so by pressing the power button on the front
panel of the Activate or the Media Connector.
If you do want to power it down, when Flexmike is removed
from charging the next day, it will automatically power the
Topcat on.
Power /
Mute