Lightspeed Redcat Access User Manual page 37

INITIAL SET-UP: MEDIA CONNECTOR
Step 1: Determine set-up location.
Choose a location for the Media Connector that is convenient to the classroom audio
sources and power supply.
The Media Connector can be placed on a counter or wall mounted. Determine the best
location for your room. Use the guidelines below when selecting the site.
NOTE: The Media Connector does not require a direct line of sight to the Topcat. However
it functions best when no obstructions are between the two devices. Do not place in an
enclosed metal cabinet.
A. Counter or desktop
3-6 feet off of the floor to allow for good
transmission.
• Not enclosed in a metal cabinet or
otherwise obstructed.
37