Lightspeed Redcat Access User Manual page 23

PLUG IN THE ACTIVATE STATION
1. Locate the 24V power supply and power cable.
2. Connect the AC power cord into the DC power supply.
3. Insert the DC connector into the DC Power jack on the back.
4. Plug the AC power cord into an electrical outlet.
5. The blue power light on the front of Activate Station will glow.
6. The green link light will begin blinking as it searches for the Topcat.
Note: If Activate System is being added to an existing Lightspeed audio system, please
refer to the Registration Procedure at www.lightspeed-tek.com/accessregistration for
proper pairing instructions.
23