Dns; Dns-A - Polycom CX5100 Administrator's Manual

Remote Packet Capture Parameters (continued)
Parameter
diags.pcap.remote.enabled
Enable or disable the remote packet capture server.
diags.pcap.remote.password
Enter the remote packet capture password.
diags.pcap.remote.port
Specify the TLS profile to use for each application.
1
Change causes system to restart or reboot.
<dns/>
The <dns/> parameters include:
● DNS-A
● DNS-NAPTR
● DNS-SRV
You can enter a maximum of 12 record entries for DNS-A, DNS-NAPTR, and DNS-SRV. records.

DNS-A

Add up to 12 DNS-A record entries using the parameters in the following table. Specify the address, name,
and cache time interval for DNS-A record x, where x is from 1 to 12.
DNA-A Parameters
Parameter
dns.cache.A.x.address
IP address.
dns.cache.A.x.name
Hostname
dns.cache.A.x.ttl
The TTL describes the time period the system uses the configured static cache record. If a dynamic network request
receives no response, this timer begins on first access of the static record and once the timer expires, the next
lookup for that record retries a dynamic network request before falling back on the static entry and its reset TTL timer
again.
Polycom, Inc.
Permitted Values
0 or 1
alphanumeric
Valid TCP Port
Permitted values
IP version 4 address
valid hostname
300 to 536870912 (2^29), seconds
Configuration Parameters
Default
0
<MAC Address>
2002
Default
Null
Null
300
56