Srtp - Polycom CX5100 Administrator's Manual

<encryption/>
The next table lists available encryption parameters.
File Encryption Parameters
Parameter
sec.encryption.upload.config
The encryption on the system-specific configuration file created and uploaded to the provisioning server.
If 0, the file is uploaded unencrypted, and overwrites whatever system-specific configuration file is on the server,
even if the file on the server is encrypted. If 1, the file is uploaded encrypted and replaces any existing
system-specific configuration file on the server. If there is no encryption key on the system, the file is not uploaded.
sec.encryption.upload.overrides
The encryption on the system-specific <MACaddress>-system.cfg override file that is uploaded to the server.
If 0, the file is uploaded unencrypted regardless of how it was downloaded, the file replaces whatever file was on the
server, even if the file on the server is encrypted. If 1, the file is uploaded encrypted regardless of how it was
downloaded. The file replaces any existing system-specific override file on the server.
1 Change causes system to restart or reboot.
<pwd/><length/>
The next table lists configurable password length parameters.
Password Length Parameters
Parameter
sec.pwd.length.admin
The minimum length for administrator passwords changed using the system. Use 0 to allow null passwords.
sec.pwd.length.user 1
The minimum length for user passwords changed using the system. Use 0 to allow null passwords.
1
Change causes system to restart or reboot.
<srtp/>
As per RFC 3711, you cannot turn off authentication of RTCP. The next table lists SRTP parameters.
SRTP Parameters
Parameter
1
sec.srtp.enable
If 0, the system always declines SRTP offers. If 1, the system accepts SRTP offers.
Polycom, Inc.
Permitted Values
0 or 1
0 or 1
Permitted Values
1
0-32
0-32
Default
0
0
Default
1
2
Permitted values
0 or 1
Configuration Parameters
Defaults
1
68