License; Log - Polycom CX5100 Administrator's Manual

HTTPD (Web Server) Parameters (continued)
Parameter
httpd.cfg.port 1
Port is 80 for HTTP servers. Care should be taken when choosing an alternate port.
httpd.cfg.secureTunnelEnabled
If 0, the web does not use a secure tunnel. If 1, the server connects through a secure tunnel.
httpd.cfg.secureTunnelPort
The port to use for communications when the secure tunnel is used.
httpd.cfg.secureTunnelRequired
If 0, communications to the web server do not require a secure tunnel. If 1, communications do require a secure
tunnel.
1 Change causes system to restart or reboot.
<license/>
The parameters listed in the next table enable you to configure the feature licensing system.
Feature License Parameters
Parameter
1
license.polling.time
The time (using the 24-hour clock) to check if the license has expired.
1
Change causes system to restart or reboot.
Note: Removing the installed license
Once the license is installed on a system, it cannot be removed.
<log/>
The event logging system supports the classes of events listed in the table
logging are supported:
● level, change, and render
● <sched/>
Caution: Changing the logging parameters
Logging parameter changes can impair system operation. Do not change any logging parameters
without prior consultation with Polycom Technical Support.
Polycom, Inc.
Permitted Values
1 to 65535
1
0 or 1
1
1 to 65535
1 0 or 1
Permitted Values
00:00 – 23:59
Configuration Parameters
Default
80
Generic=1
Lync=0
443
1
Default
02:00
Logging Levels. Two types of
59