Profileselection; Tcpipapp; Dhcp - Polycom CX5100 Administrator's Manual

TLS Profile Parameters (continued)
Parameter
sec.TLS.profile.x.deviceCert
The device certificate to use for TLS Application Profile x (x = 1 to 7).
<profileSelection/>
You can configure the parameters listed in the next table to choose the platform profile or application profile
to use for each TLS application.
The permitted values are:
● PlatformProfile1
● PlatformProfile2
● ApplicationProfile1
● ApplicationProfile2
● ApplicationProfile3
● ApplicationProfile4
● ApplicationProfile5
● ApplicationProfile6
● ApplicationProfile7
TLS Profile Selection Parameters
Parameter
sec.TLS.profileSelection.LDAP
The TLS platform profile or TLS application profile (see preceding list) to use for the Corporate Directory.
sec.TLS.profileSelection.SIP
The TLS platform profile or TLS application profile (see preceding list) to use for SIP operations.
sec.TLS.profileSelection.syslog
The TLS platform profile to use for syslog operations.
<tcpIpApp/>
This parameter includes:
● <dhcp/>
● <dns/>
Polycom, Inc.
Permitted Values
Polycom, Platform1, Platform2,
Application1, Application2, Application3,
Application4, Application5, Application6,
Application7
Permitted Values
a TLS profile
a TLS profile
PlatformProfile1 or
PlatformProfile2
Configuration Parameters
Default
Polycom
Default
PlatformProfile1
PlatformProfile1
PlatformProfile1
74