Configure The Realpresence Resource Manager To Provision The Cx5100 System; Provision The Cx5100 System Using Ftp - Polycom CX5100 Administrator's Manual

Polycom CX5100 Unified Conference Station for Microsoft Skype for Business - Administrator Guide
● lcl.datetime.time.24HourClock
● tcpIpApp.sntp.address
● tcpIpApp.sntp.address.overrideDHCP
● tcpIpApp.sntp.gmtOffset
● tcpIpApp.sntp.gmtOffset.overrideDHCP
● device.prov.serverName.set
● device.prov.serverName
● device.masterConfigFile.LogFileDirectory
For more information on these parameters, see Configuration Parameter section in the Polycom® CX5500
Unified Conference Station for Skype™ for Business Administrator Guide
Configure the RealPresence Resource Manager to Provision the
CX5100 System
Before you begin to configure the RealPresence Resource Manager (RPRM) to provision the CX5100
unified conference station, make sure you do the following:
● The device.prov.lyncDeviceUpdateEnabled parameter value must be set to 0.
You can also export the CX5100 system device settings configuration file through Web Configuration
Utility to set the value of the parameter.
● The Base Profile for the CX5100 unified conference station is set to Generic.
● The RealPresence Resource Manager, 10.1 and above, supports provisioning the CX5100 unified
conference station.
Note: You won't find the device.prov.lyncDeviceUpdateEnabled parameter in the CX5100
system's device settings configuration file if the value of this parameter is already set to 0.
You can configure the RPRM server to provision the CX5100 system, allowing you to perform a software
upgrade and monitor the online/offline devices using the following methods:
● Provision the CX5100 system using FTP
● Provision the CX5100 system using the Web Configuration Utility

Provision the CX5100 System using FTP

You can configure the RPRM server to provision the CX5100 system through FTP by storing the
configuration files in the FTP root directory.
To provision the CX5100 system using FTP:
1 Configure the FTP server address, username and password to store configuration files.
2 Prepare the following files to configure RPRM as the management server:
 <MACaddress>.cfg
Polycom, Inc. 18