Dot1X><Eapollogoff - Polycom CX5100 Administrator's Manual

SRTP Parameters (continued)
Parameter
If 0, authentication of RTP is offered. If 1, no authentication of RTP is offered; a session description that includes the
UNAUTHENTICATED_SRTP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noAuth.require
If 0, authentication of RTP is required. If 1, no authentication of RTP is required; a call placed to a system configured
with this parameter must offer the UNAUTHENTICATED_SRTP session parameter in its SDP. If this parameter is set
to 1, sec.srtp.sessionParams.noAuth.offer is also set to 1, regardless of the value in the configuration file.
sec.srtp.sessionParams.noEncrypRTCP.offer
If 0, encryption of RTCP is offered. If 1, no encryption of RTCP is offered; a session description that includes the
UNENCRYPTED_SRTCP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noEncrypRTCP.require
If set to 0, encryption of RTCP is required. If set to 1, no encryption of RTCP is required; a call placed to a system
configured with noAuth.require must offer the UNENCRYPTED_SRTCP session parameter in its SDP. If this
parameter is set to 1, sec.srtp.sessionParams.noEncryptRTCP.offer is also set to 1, regardless of the
value in the configuration file.
sec.srtp.sessionParams.noEncrypRTP.offer
If 0, encryption of RTP is offered. If 1, no encryption of RTP is offered; a session description that includes the
UNENCRYPTED_SRTP session parameter is sent when initiating a call.
sec.srtp.sessionParams.noEncrypRTP.require
If 0, encryption of RTP is required. If 1, no encryption of RTP is required. A call placed to a system configured with
noAuth.require must offer the UNENCRYPTED_SRTP session parameter in its SDP. If set to 1,
sec.srtp.sessionParams.noEncryptRTP.offer is also set to 1, regardless of the value in the configuration file.
sec.srtp.simplifiedBestEffort
If 0, no SRTP is supported. If 1, negotiation of SRTP compliant with Microsoft Session Description Protocol Version
2.0 Extensions is supported.
1 Change causes system to restart or reboot.
<dot1x><eapollogoff/>
The next table lists configurable parameters.
802.1X EAP over LAN (EAPOL) Logoff Parameters
Parameter
sec.dot1x.eapollogoff.enabled
If 0, the system does not send an EAPOL Logoff message on behalf of the disconnected supplicant. If 1, the feature is
enabled and the system sends an EAPOL Logoff message on behalf of the disconnected supplicant connected to the
system's secondary (PC) port.
sec.dot1x.eapollogoff.lanlinkreset
Polycom, Inc.
1
1
1
1
1
Permitted Values
1
0 or 1
1
0 or 1
Permitted values
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
Default
0
0
Configuration Parameters
Defaults
0
0
0
0
0
0
70