Polycom CX5100 Administrator's Manual page 49

Device Parameters (continued)
Parameter
device.local.ntpServer
Sets the NTP server that is used when the parameter device.local.ntpEnable is enabled.
device.local.deviceName
Sets the device name for each system.
device.local.updateServer
Sets the server URL the system uses to retrieve software updates.
device.local.autoUpdateEnabled
Enables the system to automatically check for software updates. If set to 1, the system checks for updates at a
specified time. If set to 0, the system does not check for updates.
device.local.updateInterval
Sets the frequency for how often the system checks for software updates on the server.
device.local.updateTime
Sets the time when the system checks for software updates.
device.local.muteType
Sets the function of the Mute button on the system.
device.local.lightingFrequency
Sets the power frequency of the system.
0 = 50Hz
1 = 60HZ
2 = 50HZ at 30fps
device.logincred.password
The user password that the system uses to connect to the provisioning server.
device.logincred.user
The user name that the system uses to connect to the provisioning server.
Polycom, Inc.
1
1
Configuration Parameters
Permitted Default
Values
string
string
string http://downloads.polyco
m.com/voice/millennium
_cx_series
0 or 1 0
-1 (never) or a -1
number
greater than
or equal to 0.
A number 0
greater than
or equal to 0
0 = Audio only 0
1 = Audio and
Video
0, 1, or 2 0
string
string
49