Configure Mac Os Support; Updating The Cx5100 Software - Polycom CX5100 Administrator's Manual

Polycom CX5100 Unified Conference Station for Microsoft Skype for Business - Administrator Guide
3 In the Control Panel, click Profile Editor.
The Enter Device Password dialog box displays.
4 Enter the Device Password and click OK.
5 In the Profile Editor tab, click Load Profile.
6 Select one of the following options:
 Load from Device—uploads the profile saved on the CX5100.
 Load from File (PC)—uploads a profile saved on your computer onto the CX5100.
 Load Default Profile—uploads the factory default profile for the CX5100.
7 After you make your selection, click Apply to Device.
The profile is saved onto the CX5100.

Configure Mac OS Support

The CX5100 unified conference station is supported on Microsoft Windows and Mac OS computers. By
default, the CX5100 automatically detects the operating system of a connected computer and integrates
with the Lync or Skype for Business client. For Mac OS computers, the active speaker and panoramic view
video streams are not supported as two separate video streams. The panoramic view overlay is supported
only on active speaker video stream.
Users can connect the CX5100 to a Mac computer with the following operating system:
● OS X 10.9 (Mavericks)
● OS X 10.10 (Yosemite)
● OS X 10.11 (El Capitan)
● OS X 10.12 (Sierra)
If for some reason the CX5500 system is unable to detect the operating system, you can use the
CX5100-CX5500 Control Panel to disable Mac OS support.
Note: The CX5100-CX5500 Control Panel is only supported on Windows computers. You
cannot use the Control Panel on Mac computers.
To configure Mac OS support using the Control Panel:
1 In the Control Panel, navigate to Profile Editor > Advanced.
2 Click the check box for Enable Mac OS support.

Updating the CX5100 Software

You can configure the CX5100 unified conference station to check for available software updates
automatically, or you can update the software manually in the Control Panel or upload new software to the
unified conference station using a USB flash drive.
Keep the following in mind while the software is updating on the CX5100:
Polycom, Inc. 23