Httpd - Polycom CX5100 Administrator's Manual

DNS-SRV Parameters
Parameter
dns.cache.SRV.x.name
The domain name string with SRV prefix.
dns.cache.SRV.x.port
The port on this target host of this service. For more information, see
dns.cache.SRV.x.priority
The priority of this target host. For more information, see
dns.cache.SRV.x.target
The domain name of the target host. For more information, see
dns.cache.SRV.x.ttl
The TTL describes the time period the system uses the configured static cache record. If a dynamic network request
receives no response, this timer begins on first access of the static record and once the timer expires, the next
lookup for that record retries a dynamic network request before falling back on the static entry and its reset TTL timer
again.
dns.cache.SRV.x.weight
A server selection mechanism. For more information, see
<httpd/>
The system contains a local Web Configuration Utility server for user and administrator features. Note that
several of these parameters can be used with Microsoft Skype for Business Server and have two default
states: a generic default value and a different value when the system is registered with Skype for Business
Server. The following table lists the default values for both states where applicable.
The web server supports both basic and digest authentication. The authentication user name and password
are not configurable for this release.
HTTPD (Web Server) Parameters
Parameter
1
httpd.enabled
If 0, the HTTP server is disabled (the Web Configuration Utility is also be disabled). If 1, the server is enabled.
1
httpd.cfg.enabled
If 0, the Web Configuration Utility is disabled. If 1, the Web Configuration Utility is enabled.
Polycom, Inc.
Permitted values
domain name string with SRV prefix
0 to 65535
RFC
0 to 65535
RFC 2782.
domain name string
RFC 2782.
300 to 536870912 (2^29), seconds
0 to 65535
RFC 2782.
Permitted Values
0 or 1
0 or 1
Configuration Parameters
Default
Null
0
2782.
0
Null
300
0
Default
Generic=1
Lync=0
Generic=1
Lync=0
58