Custom Effect - RGBlink M2 User Manual

- Save the file as M2\OSD.
There are rules to follow for saving the file:
The file No. should be 0~199 in order. Interruption is not permitted.

Save the file as M2\OSD.

The format of USB should be FAT 32.

- Press [OSD] button in the Functions area.
- Select ON and "Load From U DISK".

6.3.2 Custom Effect

Select "Effect Change" in "Toolbox", it will enter to the window as follows:
First of all, user should create a graphic image with Microsoft Paint. There are some rules to
follow in creating an image:
The background of the image should be white by default.

It should be 24 bit BMP and the size cannot be larger than the output resolution.

Paint one image on the canvas at a time, and it's better to be on the top left corner.

Click TOOLBOX and select Effect Change. There are also rules to follow in saving a file:
The file number should be 14-50 in order. Interruption is not permitted.

The file should be named as M2\EFFECT.

USB format: FAT 32

- Insert the USB into the port in the COMM area at the rear panel.
- Press [MENU] button, and select [MASK] under [ADVANCE] menu.
- Select "Load From U DISK".
- Select "Yes".
- User can set the dimension and position of the mask.
Chapter 6: Appendix
67