Transition Settings - RGBlink M2 User Manual

Turn the rotary knob, and select <Custom 1>, Press the knob to confirm. Turn the rotary knob
again, and select the mask, for example, select <Star>, Press the knob to confirm.
Then Press the [CUST1] button, the custom will change to the mask set, as shown below:
Set a Mask:
User can set the H position, V position, H size, V size of Mask and/or PIC. In addition, user can
load custom masks by U Disk. Refer to the

3.4.10 Transition Settings

1. Press the transition buttons in Transition Area, M2 has 14 kinds of wipe modes:
: Iris Cross. ←＋→ →＋←
: Iris Box. ←□→ →□←
: Iris Round. ←O→
: Fade In Fade Out
: WIPE (L→R, R→L, B→T, T→B)
: Split (vertical and horizontal)
: Binds Right
: Push to Bottom Right
2. Press the TAKE button, or use T-bar switcher to switch the image to program with selected
wipe. Using CUT does NOT display the transition effect.
->Custom 1
Layer
ON/OFF
Set Mask&PIC Pos X together
->Custom 1
Layer
ON/OFF
Mask&PIC Pox X
Custom
Chapter 3: Using Your Product
Heart
Layer 1
ON
Star
Layer 1
ON
50
EFFECT.
30