RGBlink M2 User Manual page 70

Chapter 6: Appendix
Note:
User can set the IP address of M2 according to the computer, and keep the IP address of M2 and
computer in the same segment.
2.2.2.3 Upgrade M2 program
After connection, the status will turn to green. Select the corresponding software program, and
select all the different programs to upgrade by clicking "All" box, user can also click the program
to upgrade manually. After selection, click "Upgrade" button as shown on the red box.
2.2.2.3.1 The XTOOL interface will show the upgrade progress, and the upgrade results of each
module.
2.2.2.3.2 When finish the upgrade, it will pop up the dialog "Update new version done!"
64