Chapter 2 Installing Your Product; Plugging In Signals; Plugging In Main Power; Turning On Your Product - RGBlink M2 User Manual

Chapter 2 Installing Your Product

2.1 Plugging in Signals

Connect signals to the product (ensure all devices are powered off first). Tighten connector
screws/locks where provided.

2.2 Plugging in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.

2.3 Turning on Your Product

Turn on the power switch on the rear panel.
OLED display will show as below, completing initialization before loading the latest settings and
input/output configuration.
On delivery, HDMI will be the default input signal, and the output format is 1920x1080x60 by
default.
Chapter 2: Installing Your Product
↓
M2
V 1.59
Initializing...
↓
12