Saving Views - RGBlink M2 User Manual

3.10 Saving Views

M2 provides 36 banks for saving or recording parameters. To save the current parameters and
settings:
1. Press the SAVE button in Stored Presets Area, the SAVE and PAGE button lights are lit, and
some of buttons 1~6 are lit and some are flashing.
If the button is lit, it is available for saving. If the button flashes, that means it's already
occupied, and can be overwritten.
->PAGE: 1
2. Select PAGE, for example, the button [2] is lit, press the button [2].
->PAGE: 2
3. After setting the PAGE, it will jump to BANK option, for example, the button [2] is lit, press the
button [2]:
->BANK: 2
4. Press the SAVE button again, the button light is off, and exit the SAVE function.
5. Select <Backup To U Disk>, user can save the parameters to the U Disk.
SAVE TO
BANK: 1
Backup To U Disk
SAVE TO
BANK: 1
Backup To U Disk
SAVE TO
PAGE: 2
Backup To U Disk
Chapter 3 : Using Your Product
No U Disk
No U Disk
No U Disk
47