RGBlink M2 User Manual page 10

Each SDI module has one SDI input and one SDI loop output port. The SDI input can be
connected to signals from cameras and broadcasting processing device. It also can be
connected to the next M2 or the device with SDI input.
PGM Output
HDMI-A – HDMI
2. 3 Connect to the display or the LED screen with HDMI connector or patch cord (HDMI to
DVI).
PST Output
HDMI-A – HDMI
4.5
Connect to the display with HDMI connector to preset the views.
PVW Output
HDMI-A – HDMI
8
Connect to the display with HDMI connector to monitor the signal sources.
DB15 – VGA
9 Connect to the display or projector which has VGA connector to monitor the signal
sources. (This connector does not support hotplug).
Control Connectors
TALLY Light
6.7
BNC-Genlock
12
Input signal from the controller or signal generator and other devices.
USB-A–USB
13
For custom LOGO, OSD, STILL and MASK saving, and can be loaded.
RS-232
14
For device upgrade.
RJ45–Ethernet
15
For device upgrade.
Power Connection
Power Switch
10
Illuminated power switch.
IEC – Power Input
11
Chapter 1: Your Product
4