Installation; Introduction; Mounting Position - Eaton PowerXL DB1 Installation Manual

3 Installation

3.1 Introduction

3.2 Mounting position

This chapter provides a description of the installation and electrical connec-
tion for the DB1 variable frequency drive range.
￫
While installing and/or assembling the frequency inverter, cover
all ventilation slots in order to ensure that no foreign bodies can
enter the device.
￫
Perform all installation work using only the specified, profes-
sional tools and without the use of excessive force.
￫
For further information about how to install the DB1 variable
frequency drive in different frame sizes, please see the
IL040044ZU Instruction Leaflet.
DB1 variable frequency drives have a comformal coating on their printed
circuit boards (coated boards). that provides enhanced protection from
moisture and ingress.
Without the required additional measures, using the device in the following
environments is strictly prohibited:
• Explosion-proof Ranges
• Environments with damaging substances:
• Oils and acids
• Gases and fumes
• Dust
• Radiated noise
• Environments with mechanical vibration and impact loads that go
beyond the requirements in EN 61800-5-1.
• Areas in which the variable frequency drive takes care of safety func-
tions that must guarantee machine and personnel protection.
DB1 Variable Frequency Drives 09/17 MN040031EN www.eaton.com
3 Installation
3.1 Introduction
41