2. Remove the metal ring and clean the glass
cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Attach the metal ring to the glass cover.
5. Install the glass cover.
The side lamp
1. Remove the left shelf support to get access to
the lamp.
2. Use a Torx 20 screwdriver to remove the
cover.
3. Remove and clean the metal frame and the
seal.
4. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
5. Install the metal frame and the seal. Tighten the
screws.
6. Install the left shelf support.
Steam oven User Manual
69