Descaling Reminder; Steam Generation System - Rinsing; Removing And Installing The Door - John Lewis JLBIOS635 User Manual

Table of Contents

Advertisement

2. Press
.
3. Put 250 ml of the descaling agent in the water
drawer.
4. Fill the remaining part of the water drawer
with water to the maximum level.
5. Insert the water drawer.
6. Press
.
This activates the first part of the procedure:
Descaling.
The duration of this part is around
1 hour 40 minutes.
7. After the end of the first part, empty the
grill- / roasting pan and put it on the first shelf
position again.
8. Press
.
9. Fill the water drawer with fresh water.
Make sure there is no remaining cleaning
solution inside the water drawer.
10. Insert the water drawer.
11. Press
.
This activates the second part of the procedure:
Descaling. It will rinse the steam generation
circuit.
The duration of this part is around
35 minutes.
Remove the grill- / roasting pan after the end of
the procedure.
If the function: Descaling is not
performed in the correct way, the
display will show a message to
repeat it.
If the oven is humid or wet, wipe it out with a
dry cloth. Let the oven dry fully with the door
open.

Descaling reminder

There are two descaling reminders which
remind you to perform the function: Descaling.
These reminders activate each time you switch
off the appliance.
The soft reminder reminds and recommends
you to perform the descaling cycle.
Steam oven User Manual
The hard reminder obligates you to perform the
descaling.
If you do not descale the appliance
when the hard reminder is on, you
cannot use the steam functions.
You cannot disable the descaling
reminder.
Steam generation system -
Rinsing
Remove all accessories.
Select the function from the menu: Cleaning.
The user interface will guide you through the
procedure.
The duration of the function is around 30
minutes.
The light in this function is off.
1. Put the baking tray on the first shelf position.
2. Press
.
3. Fill the water drawer with fresh water.
4. Press
.
Remove the baking tray after the end of the
procedure.
Removing and installing the
door
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
Warning! Be careful when you
remove the door from the
appliance. The door is heavy.
1. Open the door fully.
2. Fully lift up the clamping levers (A) on the two
door hinges.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents