Automatic Switch-Off; Brightness Of The Display; Cooling Fan - John Lewis JLBIOS635 User Manual

4. Set the time.
5. Press again and again until the display
shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
function: Set + Go. The set heating function
starts.
When the heating function ends, an acoustic
signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings lets you
activate and deactivate the
function: Set + Go.

Automatic Switch-off

For safety reasons the appliance turns off
automatically after some time if a heating
function operates and you do not change any
settings.
Temperature (°C)
30 - 115
120 - 195
200 - 230
The Automatic switch-off does not
work with the functions: Light,
Food Sensor, Duration, End Time.

Brightness of the display

There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the display is
lower between 10 PM and 6 AM.
• Day brightness:
– when the appliance is activated.
– if you touch a symbol during the night
brightness (apart from ON / OFF), the
display goes back to the day brightness
mode for the next 10 seconds.
36
) to start the
Switch-off time (h)
12.5
8.5
5.5
– if the appliance is deactivated and you set
the function: Minute Minder. When the
function ends, the display goes back to the
night brightness.

Cooling fan

When the oven operates, the cooling fan turns
on automatically to keep the surfaces of the
oven cool. If you turn off the oven, the cooling
fan can continue to operate until the oven cools
down.
Steam oven User Manual