Appendix 3 - Example With Siemens Plc; Siemens Step 7 - Danfoss VACON 100 industrial Installation Manual

APPENDIX 3 - EXAMPLE WITH SIEMENS PLC

9. APPENDIX 3 - EXAMPLE WITH SIEMENS PLC
Following examples shows how to use SIMATIC STEP 7 and Siemens TIA Portal with VACON
AC drive.
The GSDML files for the configuration can be downloaded from:
http://drives.danfoss.com/services/software-downloads/
9.1

Siemens STEP 7

This example shows how to configure the Siemens S7-300 PLC series to use the VACON
drive with the SIMATIC STEP 7 programming tool. Check your individual PLC information. The in-
formation used in this example probably differs from the one you have.
1. Create new project. Give new name and press OK.
2. Insert the station.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
-> VACON FIELDBUS CONFIGURATIONS
11694_uk
vacon • 53
®
100
®
100 AC
11695_uk
9