Table of Contents
Advertisement
vacon • 32
Block definition
nth Parameter Values
The structure of parameter responses is described in the table below:
Block definition
Response header
1st Parameter Value(s)
(only for request
"Request")
nth Parameter Values
The table below contains descriptions of parameters.
Sub-
index
1
Number of array ele-
2
Standardisation
3
4
Variable attribute
5
6
7
5
Byte n+1
Table 29.
Byte n+1
Request Ref. mirrored
Axis-No. / DO-ID mirrored
Format
Values or Error Values
Table 30. Parameter description
Field name
Identifier (ID)
ments
FloatingPoint (IEEE
factor
Array of four
Reserved
ASCII string, 16 char-
Name
Array of four
Low limit
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
...
Parameter response
No. of Parameters = n
...
...
Data type
A bitmask with information about the
Unsigned16
parameter characteristics.
For array parameters, the number of
Unsigned16
elements in the array.
If the information represented by the
parameter can be converted into a stan-
754)
dardised form, this field contains a fac-
tor for this conversion.
Array of two
Contains two index numbers for
Unsigned8
describing the parameter information.
Reserved, always 0.
Unsigned8
Symbolic name of the parameter.
acters
Limit for valid values of the parameter.
Unsigned8
PROFINET IO protocol
Byte n
4 + 6 x n + ... +
(For-mat_n x
Byte n
Response ID
No. of Values
(Format_n x
Description
n
Qty_n)
n
0
2
4
4 + ... +
Qty_n)
Advertisement
Table of Contents
