vacon • 62
APPENDIX 3 - EXAMPLE WITH SIEMENS PLC
9.2
Siemens TIA Portal
®
This example shows how to configure the Siemens S7-300 PLC series to use the VACON
100 AC
drive with the Siemens TIA Portal programming tool. Check your individual PLC information. The
information used in this example probably differs from the one you have.
1. Create a new project.
2. Give the project a name and location and click "Create". When the project is created, click "Proj-
ect View" from the lower left corner of the screen.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
9