Table of Contents
Advertisement
vacon • 38
Error number Meaning
0x20
0x21
0x22...0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F...0xFF
5
Table 36. PROFIdrive parameter access errors
Parameter text cannot be
changed
Invalid request ID
Reserved (not used)
Invalid request reference
Invalid request ID
Reserved (not used)
Invalid number of parame-
ters
Invalid attribute
Reserved (not used)
Request is too short
Parameter not found.
Invalid change request.
General error
Reserved (not used)
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
When used
Change request to unavailable parameter text.
If a parameter request does not have the request ID
01h or 02h, this error code is returned.
Unallowed value for request reference.
Unallowed value in request ID (neither Request Pa-
rameter nor Change Parameter).
Invalid number of parameters in request (0 or
greater than 39).
Invalid attribute specified in request.
Not enough parameter value data was transmitted
in a Change request. Alternatively, the request did
not contain a complete parameter address.
Parameter was not found or error occurred while
accessing it.
Issue with request was found and request was not
handled.
General error occurred.
PROFINET IO protocol
Advertisement
Table of Contents
