CHAPTER 2 Checks and Preparation
2.12 Mounting and Removing the Standard Terminal and Withstand high-voltage high-precision Terminal
The mounting and removing procedure of the standard terminal and Withstand high-voltage high-precision
terminal is described blow.
When mounting or removing the standard terminal or Withstand high-voltage high-precision terminal,
please make sure that the GL840's power is turned OFF.
To Remove
Pull out the terminal in the direction of the arrow while pressing the lock portions (2 places) at the bottom of
the standard terminal or the Withstand high-voltage high-precision terminal.
(1) Press the two lock portions in the direction indicated by arrows.
(2) Pull the terminal unit out towards the direction indicated by the arrow.
Pull the terminal unit out as shown in the following figure.
2
1
2-22
Lock portion
Terminal unit
Top
Bottom
Pull out