(5 ) Wlan Setting - GRAPHTEC GL840 User Manual

(5 ) WLAN setting

This is used to perform the wireless LAN settings and the wireless sensor registration.
* When the wireless unit is not installed in this GL840, this screen is not displayed.
Station settings
Wireless LAN
Station setting SSID input
SSID search
Automatic
setting (WPS)
Encryption method
11n
Reflection of setting
Other setting Connect / disconnect
(When the station
ST-IP setting
is set)
Access point SSID input
setting
Automatic
setting (WPS)
Encryption method
Channel
Stealth
11n
Reflection of setting
Reflection of AP-IP setting
setting
(When the Access
point is set)
Wireless
sensor setting
•
Access point (operating as base unit)
This is used to set when connecting between the GL840 and sold separately Petit LOGGER GL100-WL (up
to 5 units) in the wireless LAN.
•
Station (operating as child unit)
This is used to set when performing the control from the PC and the data transfer to the PC by connecting
the sold separately wireless LAN base unit.
Setting
WPS system
WPS execute
IP address automatic acquisition Not used or used
IP address
Subnet mask
Port number
Gateway
DNS address
Reflection of setting
WPS system
WPS execute
IP address
Subnet mask
Port number
Gateway
Number
Connection
Module name
Search
AMP1
AMP2
Access point settings
Selections available
Off, station, access point
Character string input
Press right key to execute
Push button method / PIN method
Press right key to execute
None, WEP, WPA-PSK/WPA2-PSK
Off, On
Press right key to execute
Press right key to execute
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
1024 to 65535
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
Press right key to execute
Character string input
Push button method / PIN method
Press right key to execute
None, WEP, WPA-PSK/WPA2-PSK
1ch to 13ch
Off, On
Off, On
Press right key to execute
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
0 to 255.0 to 255.0 to 255.0 to 255
(only when the IP address automatic acquisition is not used.)
1024 to 65535
Press right key to execute
1 to 5
Off, On
Character string input
Press right key to execute
Display the set sensor.
Display the set sensor.
CHAPTER 3 Settings and Measurement
3-61