Data Replay Menu - GRAPHTEC GL840 User Manual

CHAPTER 3 Settings and Measurement

(10) Data replay menu

Select the data you want to replay from the "Data replay source" by pressing the [REV1EW] key and replay
the captured data.
<Select replay data source>
Select items
File
For CSV-formatted data, only the data captured by this GL840 can be replayed.
<When using the replay data and A cursor>
Data replay menus are displayed by pressing the [MENU] key during replay.
Cursor
Position
3-80
Specify the file in the capture destination (save destination).
Setting
Move to First Data
Move to Last Data
Move to Center
Move to Method:
Selected Position
[Position]
[Time]
Cursor Synch
Description
<When using the replay data and A cursor>
Press right key to execute.
Press right key to execute.
Press right key to execute.
Position, Time
Position 0 to end of data
For example, if the sampling interval is 100 ms, capture
destination is the built-in RAM, and the number of capture
points is 10000, settings up to 9999 ms are available.
Date Date from the start to end of the data
Time Time from the start to end of the data
Off, On
Selections available