Installing The Wireless Lan Unit (B-568: Option) - GRAPHTEC GL840 User Manual

CHAPTER 2 Checks and Preparation

2.8 Installing the Wireless LAN Unit (B-568: Option)

To connect the GL840 to the wireless LAN, insert the wireless LAN unit in the SD CARD2 slot.
•
When the SD memory card has been inserted into the SD CARD2 slot, please remove the SD memory card.
•
When the wireless LAN unit has been inserted, the SD memory card cannot be inserted into the SD CARD2
slot.
•
When inserting the wireless LAN unit, please make sure that the power is turned OFF and then install the
unit.
•
When using the wireless LAN, please check the "3. Notes on Radio Law" in the "Notes on Use" described
above.
How to insert the wireless LAN unit
Insert the wireless LAN unit into the SD CARD2 slot.
Wireless LAN unit
(Option: B-568)
(1) Turn OFF the GL840's power.
(2) Remove the SD CARD2 protective cover.
* Please keep so as not to lose the SD CARD2 protective cover.
(3) When the SD memory card has been inserted, remove the SD memory card.
* The SD memory card is unlocked by pushing gently the SD memory card. Then, remove the SD
memory card.
2-14
Protective cover
SD memory card