CHAPTER 3 Settings and Measurement
(11) NAVI menu
The "MENU" screen is displayed by pressing the [NAVI] key during free-running. When you operate in
accordance with the instructions displayed on the screen, the capturing, trigger, and wireless LAN, etc. can
be set.
<NAVI menu>
Setting items
Easy capture setting
Easy trigger setting
Wireless LAN setting
<Example of operation procedure>
An example of the operation procedure for easy capture setting is described below.
1. Select the "Easy Capture Setting" and then press the [ENTER] key to display the following menu screen.
2. When the settings (input, sensor, and range) are satisfied, select the "Next>>" and then press the [ENTER]
key. The "Input, Sensor, and Range, etc." screens are displayed. Set the necessary items.
3. After setting, when you the "Next>>" is selected and then the [ENTER] key is pressed, the "Sampling,
Interval, Capture Destination" screens are displayed. Set the necessary items.
3-84
The conditions (input, sensor, range, and sapling) for data measurement and data capture
can be set in accordance with the instructions displayed on the screen.
The settings (trigger) for data capture can be set in accordance with the instructions
displayed on the screen.
This is displayed when optional wireless unit is installed. The wireless LAN settings and
wireless sensor (GL100-WL + GL sensor and terminal/adapter) connection settings can be
set in accordance with the instructions displayed on the screen.
Description