Setting Menus - GRAPHTEC GL840 User Manual

3.4 Setting Menus

When you press the [MENU] key during Free Running, the following menu screens appear.
AMP
* When optional wireless unit is not installed, these menu screen are not displayed.
(1) AMP settings
This menu is used to specify input signal-related settings.
<Analog settings>
Input Standard terminal and Withstand high-
voltage high-precision terminal
GS sensor and terminal/addapter
(optional)
Standard terminal Range
and Withstand
high-voltage high-
precision terminal
Filter
Temperature and Range
humidity sensor
(GS-TH)
Filter
3-axis acceleration Range
/ temperature
sensor (GS-3AT)
Filter
4ch voltage / Range
temperature
terminal (GS-4VT)
Filter
4ch thermistor Range
(GS-4TSR)
Filter
DATA TRIG
Setting
[Voltage]
[Temperature] Sensor
Range
[Humidity]
[Temperature] / [Dew-point
temperature] / [Accumulated
temperature]
[Humidity]
[Acceleration] Sensor
Range
[Humidity]
[Voltage]
[Humidity] Sensor
Range
[Humidity] Sensor
Range
CHAPTER 3 Settings and Measurement
I/F
<Logic Pulse settings>
Selections available
Off, DC, TEMP, RH
Temperature and humidity sensor (GS-TH): Off, TEMP, DEW, ACC.
TEMP
3-axis acceleration / temperature sensors (GS-3AT): Off, TEMP /
ACC. X / ACC. Y / ACC. Z
4ch voltage / temperature terminal (GS-4VT): Off, DC, TEMP
4ch thermistor (GS-4TSR): Off, TEMP
Illumination / ultraviolet sensor (GS-LXUV): Off, ILLUM. / UV / ACC.
ILLUM. / ACC. UV
CO2 sensor (GS-CO2): Off, CO2
Adapter for AC current sensor (GS-DPA-AC): Off, CURRENT /
POWER, ACC. POWER
20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50, 100V; 1-5V
Thermocouple: TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N,
TC-W
Resistance bulb: Pt100, JPt100, Pt1000
100, 500, 2000°C
100% fixed
Off, 2, 5, 10, 20, 40
100°C fixed
100% fixed
None
Peak / Ave. / RMS
2, 5, 10G; 20, 50, 100m/s
100% fixed
None
20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50V; 1-5V
Thermocouple: TC-K , TC-T
2000°C fixed
None
Thermistor: TSR-A, TSR-J
200°C fixed
None
WLAN ※1 OTHER
2
3-21