Interface Settings - GRAPHTEC GL840 User Manual

CHAPTER 3 Settings and Measurement

(4) Interface settings

This menu is used to specify conditions for PC connection.
Selections availableNew Line code
USB settings USB ID
TCP-IP setting Auto IP Address Acquisition
IP Address
Subnet Mask
Port Number
Gateway
DNS Address
Keep Alive
FTP/WAB
server
settings
E-mail
setting
3-56
Setting
FTP Client FTP Server
User Name
Password
Port Number
PASV Mode
FTP Server Connection Test
FTP server Port number
WEB server Port number
E-mail send Destination
setting setting
Notification
setting
E-mail account User name
setting
Password
E-mail address
E-mail send Sending (SMTP) server name Enter up to 63-character string
Server setting
SMTP port number
Time zone
SMTP
setting
CR+LF, LF, CR
0 to 9
On, Off
0-255.0-255.0-255.0-255
(only if Auto IP Address Acquisition is Off)
0-255.0-255.0-255.0-255
(only if Auto IP Address Acquisition is Off)
1024 to 65535
0-255.0-255.0-255.0-255
(only if Auto IP Address Acquisition is Off)
0-255.0-255.0-255.0-255
(only if Auto IP Address Acquisition is Off)
Off, 10 seconds, 30 seconds, 1 minutes,
10 minutes, 30 minutes, 1 hour
Enter up to 127-character string
Enter up to 31-character string
Enter up to 31-character string
0 to 65535
Off, On
Press right
0 to 65535
0 to 65535
To Enter up to 63-character string
CC1 to CC3 Enter up to 63-character string
Subject. Enter up to 63-character string
Alarm Off, On
Low Battery Off, On
Low Off, On
communication
strength
Free space in SD Off, On
memory card
Periodic Off, 1 hour, 2 hours, 3 hours, 6 hours, 12 hours,
notification specified time
Enter up to 63-character string
Enter up to 31-character string
Enter up to 63-character string
0 to 65535
UTC-12:00 to UTC+13:00
SMTP Off, POP before SMTP, SMTP-AUTH
authentication
method
SMTP-AUTH Off, PLAIN, LOGIN, CRAM-MD5
Same as POP3 No or Yes
SMTP user name Enter up to 63-character string
(user ID)
SMTP password Enter up to 31-character string
SMTP encryption Off, StartTLS, Over SSL
Test send Press right
Selections available
key to execute
key to execute