Trig Settings - GRAPHTEC GL840 User Manual

CHAPTER 3 Settings and Measurement

(3) TRIG settings

This is used to specify trigger conditions and alarms.
Start Side Source Setting
[Level]
[Alarm]
[Date]
[Weekly]
[Duration]
Stop Side Source Setting
[Level]
[Alarm
[Date]
[Weekly]
[Duration]
Repeated Capturing
Alarm Level Mode
Settings
Level
Output
Detection Method
Alarm Hold
Send Burnout Alarm
3-50
Setting
Mode
Combination
Level
Alarm port
number
Date
Time
Day of week
Time
Mode
Combination
Level
Alarm port
number
Date
Time
Day of week
Time
Selections available
Off, Level, Alarm, External Input, Time, Day, Duration
Analog: Off, H, L, Window In, Window Out
Logic: Off, H, L
Pulse: Off, H, L, Window In, Window Out
Level OR, Level AND, Edge OR, Edge AND
Set numeric value
1, 2, 3, 4
From 2005.1.1 to 2035.12.31
From 0:0:0 to 23:59:59
Off or On setting for each of Sunday through Saturday
From 0:0:0 to 23:59:59
From 0:0:1 to 9999:59:59
Off, Level, Alarm, External Input, Time, Day, Duration
Analog: Off, H, L, Window In, Window Out
Logic: Off, H, L
Pulse: Off, H, L, Window In, Window Out
Level OR, Level AND, Edge OR, Edge AND
Set numeric value
1, 2, 3, 4
From 2005.1.1 to 2035.12.31
From 0:0:0 to 23:59:59
Off or On setting for each of Sunday through Saturday
From 0:0:0 to 23:59:59
From 0:0:1 to 9999:59:59
Off, On
Analog: Off, H, L, Window In, Window Out
Logic: Off, H, L
Pulse: Off, H, L, Window In, Window Out
Set numeric value
1, 2, 3, 4
Level, Edge
Held or Not held
Sent or not sent