Using The Battery Pack (B-569 : Option) - GRAPHTEC GL840 User Manual

2.10 Using the Battery Pack (B-569 : Option)

•
The B-569 (optional) is the only battery type that can be used with the GL840.
•
Refer to the specifications (Page 4-11) for information on the battery run time.
•
The operating temperature ranges of the GL840 with a battery pack mounted are as follows:
Running on battery
Battery being charged
Mounting the Battery Pack
(1) While lightly pushing the grip of the battery cover, slid the cover in the direction indicated by the arrow.
(2) Attach the battery pack (B-569).
2
Battery pack
•
Either one or two battery packs can be attached.
•
To connect one pack, connect to either one of the connectors.
•
Attaching two battery packs allows longer operational time.
•
When attaching two battery packs, make sure the battery levels are equivalent.
•
Do not use a new battery with an old battery at the same time.
•
When attaching two battery packs, make sure the remaining amount are same.
•
If you are not sure about the amount, charge each battery and then attach full-charged two battery packs.
: 0 to 40°C
: 15 to 35°C
Grip
1
CHAPTER 2 Checks and Preparation
2-19