2.22 Connecting the Adapter for AC Current Sensor (GS-DPA-AC) (Optional)
For the connecting procedure and specifications of Adapter for AC current sensor, refer to the Instruction
Manual supplied in the sensor.
The connecting procedure between the GL840 and Adapter for AC current sensor is described.
• Turn Off the GL840's power.
• Connect firmly the connector of Adapter for the AC current sensor to the GL840's GS sensor and terminal
/ adapter connection terminal (GS-INPUT).
• Turn On the GL840's power and make sure that the sensor settings are displayed on the AMP Setting
screen.
1. Hook portion ...................Used to mount to a wall.
2. Input terminal .................Used to connect to the AC current sensor (sold separately).
3. Connector .......................Used to connect to the connector on the GL840 module.
Please do not use in a state in which only the Adapter for AC current sensor is attached on a wall or the
like.
The damage of the connected cable and connector or the drop of the GL840 may be caused.
< Extension cable >
The module can be used approx. 1.5 m away from the GL840 by using an extension cable for GS (GS-EXC).
However, you cannot connect and use multiple extension cables.
1. Hook portion
2. Input terminal
3. Connector
GL840 main module
CHAPTER 2 Checks and Preparation
2-45